EV Edge Spacer (PATENT PENDING)
When installing pavers along the perimeter walls, it is common to place rubber strips between the pavers and the walls to prevent the pavers from hitting the wall. The rubber strips are usually glued to the edge of the pavers or to the wall. The glue will fail over time and the rubber strips will fall off. Then the pavers will start to shift, which will not only cause pavers to hit the wall and break, it will also create enlarged open space between pavers and create tripping hazard. Therefore, it is recommended that EV Edge Spacers be used to replace the rubber strips.
Edge spacer installed on top of a pedestal:
For a wall corner installation, the Center spacer tabs on the Edge spacer should be broken off. The four Side spacer tabs are between the paver edges and the walls:
For an edge installation, if the pedestal is under two pavers, the two Spacer tabs along one edge should be broken off. The two Center spacer tabs are between the two pavers and two Side spacer tabs are between the pavers and the wall.
For an edge installation, if the pedestal is under the middle of one paver, the two Spacer tabs along one edge and the two Center spacer tables should be broken off. The two Side spacer tabs are between the pavers and the wall.
